台塑CSR
  • 首頁
  • 最新消息
  • 公司治理
    董事長的話 經營理念 目標進度與SDGs連結 利害關係人與重大性議題 重大性主題與價值鏈鑑別 公司治理概況 社會責任工作推動 內控機制 風險管理 外部協會參與 智慧財產權
  • 永續環境
    環境保護與氣候變遷 水資源使用與管理 溫室氣體與能源管理 空氣污染物管理 廢棄物管理 環保法令遵循 安衛環組織架構與管理 原料使用情形 產品安全衛生責任 二氧化碳捕獲再利用 環境會計
  • 幸福人才
    人資政策與員工結構 員工福利與關懷 人才培訓與留用 人權政策
  • 供應鏈
    供應商及承攬商管理 供應鏈工安管理 承攬商工安管理 採購政策
  • 健康職場
    職場安全管理 員工關懷與健康職場 工安與高風險疾病預防 廠區緊急應變機制
  • 社會公益
    當地社區議合 產業促進 敦親睦鄰 社會扶助與捐獻
  • 繁

永續環境
Sustainable Environment

   /    永續環境    /   空氣污染物管理

AIR POLLUTANT MANAGEMENT
空氣污染物管理

管理方針

健康與福祉

目標與標的:

為防止空氣污染事件發生,因此推動各項空氣污染防制及改善工程,以「零污染」為每年之目標。

承諾:

遵循國內環保法令並加嚴管制:
1.
在建廠設計階段以最佳可行技術(BAT)及最佳可行控制技術(BACT)進行設計。
2.
加嚴管控VOCs逸散管制措施,推動「VOCs逸散自主檢測修復作業」,要求各廠全面檢查所有設備(包括已建檔元件、焊道、設備面等可能洩漏處),若發現異常逸散(超過100ppm),除現場立即修復外,並持續追蹤,避免異常再次發生。
3.
安排各事業部於經營委員會針對「VOC設備元件洩漏之短中長期改善對策」進行報告,藉由各廠落實執行自主改善及管理,減少VOC洩漏異常。
4.
在生產運轉階段,不僅採用最佳空污防制設備,並推動廢氣減排、VOC減量、異味管制等措施,同時停產CFC-11、CFC-12等易破壞臭氧層物質。

政策:

本公司依循董事長簽署之「安全/衛生/環境政策」,秉持「安全衛收環境與經濟並重」之經營理念,落實推動各項環境政策,並 •加強與鄰近居民溝通,展現本公司做好安全環境衛生之努力與決心,以獲得社會大眾之瞭解和認同。(本公司 官網 )

責任:

1.
安全衛生處
2.
為促使各部門確實做好環保工作,防止環境污染異常,以達「零污染」之目標,將「環保」列入效率獎金評核項目,如有異常發生即予減發獎金。

案例說明

為強化確認排放管道CEMS監測數據準確性,2019年委託第三公正單位(德國TUV萊因技術監護顧問公司)驗證查核CEMS系統(system audit)、監測數據(data audit)與功能(performance audit)三大部分,已於2020年7月實地查驗。

監測與評估

為即時掌握麥寮廠區各項環境指標,著手建置完善的環境監測網,並參考當地盛行風向,由內往外採取八層密集監控管制作業,以利儘速追查排放源,確保當地空氣品質。

防制措施

本公司為做好各項環保工作,持續採用最佳製程技術,以及各項完善的空氣污染防制系統,目前空氣污染防制成效不僅已超越國家標準,更符合世界最佳水準的優異表現。除了各項污染物已符合環保法規要求外,本公司持續推動各項空氣污染自主減量工程。

排放管道
製程設備及操作條件改善
Flare常態排氣回收、再利用
各種污染防治設備效率之提升
設備元件
設備元件數量精減、保養技術提升
檢測技術提升 - 推動GasFindIR檢測
確保廠商檢測作業品質
廢水處理廠
廢水處理場加蓋
曝氣槽排放之氣體引至除臭塔處理
前段廢水單元VOC引至CFB鍋爐
儲槽
固定儲槽改裝或汰換成浮頂槽
儲槽排氣密閉收集至燃燒設備處理
儲槽排氣密閉收集至回收設備進行回用

台塑公司
空氣污染防制

室內煤場與密閉式輸送系統

靜電集塵器(EP)

排煙脫硝系統(SCR)

排煙脫硫系統(FGD)

FPC CSR REPORT
台灣塑膠工業股份有限公司
企業社會責任報告書

下載   永續環境

Sustainable Environment

   /    Sustainable Environment    /   Air Pollutant Management

Air Pollutant Management

Management Approach

good health and well-being

Goals and targets:

To prevent air pollution incidents, FPC implements air pollution controls and improvements in the hope of achieving the annual goal of zero pollution.

Commitment:

Comply with environmental laws and regulations in Taiwan:
1.
Adopting BAT and BACT during the complex design.
2.
Strengthening the control over VOCs by implementing the “VOCs Escape Self-detection and Repair Procedures,” where each complex is required to check all facilities (including possible leaks of components, welds, and equipment) and repair any abnormal VOCs escape (over 100ppm) immediately and continuously track to avoid recurrences.
3.
Arranging each business unit to report the “Short-term, Mid-term, and Long-term Strategies for Improving VOCs Leaks” to the Business Management Committee to reduce abnormal VOC leaks.
4.
Adopting the best air pollution control equipment and implementing waste exhaust gas reduction, VOCs reduction, and odor control during production, and stopping the production of CFC-11, CFC-12, and other ozone-depleting substances.

Policy:

Upholding the business philosophy of balancing safety, health, and environment and economic development, FPC implements various environmental initiatives in line with the 'Safety/Health/Environment Policy' approved by the Chairman, and demonstrates its commitment to a safe and healthy environment to neighboring residents to win the understanding and support from the public.

Unit in charge:

1.
Safety and Health Department
2.
To minimize environmental pollution, FPC includes environmental protection in the performance evaluation for each department, and deducts the performance bonus in case of any abnormalities.

Monitoring and Assessment

In order to keep abreast of various environmental indicators in real time at the Mailiao Complex, FPC sets out to establish a comprehensive environmental monitoring network, and incorporates eight layers of intensive monitoring control by reference to local prevailing wind directions in order to facilitate the rapid tracking of emission sources, thereby ensuring local air quality.

Control Measures

In order to implement environmental protection, FPC regularly adopts optimal production technologies and other forms of pollution control systems, which has enabled us to achieve pollution control results that have surpassed national standards and are on par with the performance of global optimization standards. In addition to ensuring that various pollutants comply with environmental protection regulations, we have also continued to promote air pollution reduction projects.

Discharge Pipes
Improve process equipment and operating conditions
Recycle and reuse flare normal exhaust gas
Enhance the efficiency of various pollution prevention equipment
Equipment Components
Reduce the number of equipment components and Improve maintenance technology
Improve detection technology - promote GasFindIR detection
Ensure the quality of detection by manufacturers
Wastewater Treatment Plants
Install covers in wastewater treatment plants
Channel gas emissions from aeration tanks to deodorization towers for treatment
Channel VOCs in the front-stage wastewater units to CFB boilers
Storage Tanks
Modify fixed storage tanks or replace them with floating roof tanks
Seal and collect exhaust gas from storage tanks to combustion equipment for treatment
Seal and collect exhaust gas from storage tanks to recycling equipment for reuse

FPC Air Pollution Control Methods

Indoor Coal Yard with Closed Delivery System

EP

SCR

FGD

Formosa Plastics Corporation
CSR Report

download   Sustainable Environment

台塑CSR

網站地圖

  • 最新消息
  • 公司治理
  • 永續環境
  • 幸福人才
  • 供應鏈
  • 健康職場
  • 社會公益
  • 報告下載
  • 聯絡我們

企業連結

  • 台塑集團
  • 台灣塑膠
  • 台塑石化
  • 南亞塑膠
  • 台灣化學

相關資訊

  • 版權說明
  • 線上問卷
  • Powered by Formosa Plastics Corporation.
  • © 2019 All rights reserved.
  • 訂閱最新消息

台塑CSR

網站地圖

  • 最新消息
  • 公司治理
  • 永續環境
  • 幸福人才
  • 供應鏈
  • 健康職場
  • 社會公益
  • 報告下載

企業連結

  • 台塑集團
  • 台灣塑膠
  • 台塑石化
  • 南亞塑膠
  • 台灣化學
  • Powered by Formosa Plastics Corporation.
  • © 2019 All rights reserved.
  • 訂閱最新消息

訂閱最新消息

電子信箱